Biaxial Geogrid
2017年4月23日
Polyester Geogrid
2017年4月23日

Geocell Description

Haisan Geocell is made of a new type of high strength geosynthetics, which is popular with both domestic and abroad, in accordance with GB/T 19274-2003 implementation of the standards, which welding the strengthened HDPE sheets by the high-power ultrasonic and forming to be a structure of three-dimensional reticular formation. Easily folding and convenient for transportation. When be in construction, the geocell can be pull into a network and launched into a three dimensional honeycomb grid. As it filled in soil, macadam, concrete or other granular material, constituted to be a construction which has strong side wise restraint and high rate of stiffness.


Geocell Features

  • light material, resistant to wear and chemical properties stability, light fastness aging, acid and basic resistance, applicable to the different soil and geological conditions of the desert.
  • The lateral limits and higher anti-skid and anti-deformation, effectively increase the carrying capacity of roadbed and decentralized load.
  • High capacity and good dynamic performance, anti-erosion ability.
  • A high degree of geocell change, such as welding geometry from different projects can meet the needs.
  • Flexibility,small transport to connect to facilitate the construction speed.
  • The construction of local materials can reduce construction costs, superimposed with convenient for transportation.

Are you interested in our product?

If you have any question, please feel free to feedback.

Close

Application Range

  • Stabling railway bed.
  • Stabling road soft ground treatment.
  • Withstanding load capacities guard against the retaining wall.
  • Shallow Water River courses to govern.
  • Pipelines and sewer's structural supports.
  • Prevent the landslide and the load bearing gravity mixed style retaining wall.
  • Independent walls, the wharf, against slope dike.
  • Deserts, the beach and the river bed, the river bank managements.
specification height of chamber(cm) Weld spacing (mm) Expanding size(m2)
DTGS 5 5 400 4.5×5
DTGS 5 5 300 6.5×4.5
DTGS 8 8 1000 13.2×4.5
DTGS 8 8 400 4.5×5
DTGS 8 8 330 6.5×4.5
DTGS 10 10 400 4.5×5
DTGS 10 10 330 6.5×4.5
DTGS 15 15 400 4.5×5
DTGS 15 15 330 6.5×4.5
DTGS 20 20 400 4.5×5
DTGS 20 20 330 6.5×4.5
Item Term Test measure
Tensile strength meter for piece k material  M Pa ≥23 GB1040-1992
Weld tensile strength N/10cm ≥1000 GB1040-1992
Tensile failure% ≥600 GB1040-1992
Low embrittlement temperature ℃ ≤-23
+ Technical-mechanical property of the product
specification height of chamber(cm) Weld spacing (mm) Expanding size(m2)
DTGS 5 5 400 4.5×5
DTGS 5 5 300 6.5×4.5
DTGS 8 8 1000 13.2×4.5
DTGS 8 8 400 4.5×5
DTGS 8 8 330 6.5×4.5
DTGS 10 10 400 4.5×5
DTGS 10 10 330 6.5×4.5
DTGS 15 15 400 4.5×5
DTGS 15 15 330 6.5×4.5
DTGS 20 20 400 4.5×5
DTGS 20 20 330 6.5×4.5
+ Physical property
Item Term Test measure
Tensile strength meter for piece k material  M Pa ≥23 GB1040-1992
Weld tensile strength N/10cm ≥1000 GB1040-1992
Tensile failure% ≥600 GB1040-1992
Low embrittlement temperature ℃ ≤-23