Fiberglass product

  • Date
    2017年4月24日
    Vivamus nec mauris. Pellentesque facilisis. Maecenas gravida, quam tempus rutrum id, ante. Quisque sed quam elit viverra.
  • Date
    2017年4月24日
    Vivamus nec mauris. Pellentesque facilisis. Maecenas gravida, quam tempus rutrum id, ante. Quisque sed quam elit viverra.
  • Date
    2017年4月24日
    Vivamus nec mauris. Pellentesque facilisis. Maecenas gravida, quam tempus rutrum id, ante. Quisque sed quam elit viverra.
  • Date
    2017年4月24日
    Vivamus nec mauris. Pellentesque facilisis. Maecenas gravida, quam tempus rutrum id, ante. Quisque sed quam elit viverra.
  • Date
    2019年2月26日
    Fiberglass surface mat/tissue It is a kind of new decoration material . it is made from the copped strand fiberglass processing by wet process molding. belonging to green environmental protection materials. It can be used as the veneer of all kinds of thermal insulation board ,mineral wool board, fiberglass cotton board, polyfoam, the veneering of suspended ceiling and the wall. […]
  • Date
    2019年2月27日
    E-Glass Woven Roving E-glass woven roving are high-performance reinforcement fabric made by interweaving direct roving. E-glass woven roving are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. E-glass woven roving are used in hand lay up process, filament winding, molding and continuous laminating process for the production of boats, transport facility, construction, chemical corrosion and other fields. Product […]
  • Date
    2019年2月26日
    Product Description: E-glass chopped strand mats are an unwoven fabric consisting of randomly distributed chopped strands held together with a powder or emulsion binder. Compatible Resins and Applications Strand: E-glass chopped strand mats are compatible with unsaturated polyester, vinyl ester, epoxy resins. The products are most widely used in hand lay-up process and can also be used in filament winding, […]
  • Date
    2019年2月26日
    Introduction: Haisan brand Alkaliresistant fiberglass mesh fabric is basis of any heat insulation system. Cracks are prevented because of good chemical corrosion resistance and high warp and weft strength~Distortions insulation system from high impact are minimized because the directions.   Specification: Mesh size: 2.5mm*2.5mm, 4mm*4mm, 5mm*5mm, 6mm*6mm, 7mm*7mm, 8mm*8mm, 10mm*10mm, 12mm*12mm The unit grams: 60g/㎡ to 580g/㎡ Width:10cm to 3m Length: 50m/roll to 1500m/roll Color: white, yellow, blue, green, burgundy, orange etc. Raw material: c-glass yarn or e-glass yarn   Technical Specification: Spec. Width Resin mark Resin content(%) Alkali Resistant Properties (%) Tensile Strength Warp (N/5cm) Tensile Strength Weft (N/5cm) […]